|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NTE891M & NTE891SM Integrated Circuit Dual Audio Operational Amplifier Description: The NTE891M and NTE891SM are dual general purpose operational amplifiers designed with particular emphasis on performance in audio systems. Thiese devices deliver low noise, high speed and wide bandwidth without increasing external components for all closed loop gains and is therefore optimized for all preamp and high level stages in PCM and HiFi systems. Features: D Wide Dynamic Range D Low Input Noise Voltage D High Slew Rate D High Gain Bandwidth Product D Wide Power Bandwidth D Low Distortion D Low Offset Voltage D Large Phase Margin D Available in 8-Lead Mini DIP (NTE891M) and Surface Mount SOIC-8 (NTE891SM) Absolute Maximum Ratings: Supply Voltage, VCC - VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V Differential Input Voltage (Note 1), VID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Input Voltage Range (Note 1), VIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V Power Dissipation (Note 2), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to +85C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -60 to +150C Lead Soldering Temperature (10 seconds), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +260C Note 1. If supply voltage is less than 15V, it is equal to supply voltage. Note 2. This is a permissible value at TA +85C. DC Electrical Characteristics: (TA = +25C, VS = 15V, unless otherwise specified) Parameter Input Offset Voltage Input Offset Current Input Bias Current Voltage Gain Output Voltage Swing Symbol VOS IOS IB AV VOM RL = 2k, VO = 10V RL = 10k RL = 2k Input Common-Mode Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Supply Current VCM CMRR PSRR IQ VIN = 12V VS = 15V to 5V, -15V to -5V VO = 0V, Both Amps Test Conditions RS = 10 Min - - - 90 12 10 12 80 80 - Typ 0.3 10 500 110 13.5 13.4 14.0 100 100 5 Max 5 200 1000 - - - - - - 8 V dB dB mA Unit mV nA nA dB V AC Electrical Characteristics: (TA = +25C, VS = 15V, RL = 2k, unless otherwise specified) Parameter Slew Rate Gain Bandwidth Product Average Temperature Coefficient of Input Offset Voltage Distortion Input Referred Noise Voltage Input Referred Noise Current Power Bandwidth Unity Gain Frequency Phase Margin Input Referred Cross Talk Symbol SR GBW VOS/T Test Conditions RL = 2k f = 100kHz Min 5 10 - Typ 7 15 2 Max - - - Unit V/s MHz V/C THD en in PBW fU M RL = 2k, f = 20 20kHz, VOUT = 3Vrms, AV = 1 RS = 100, f = 1kHz f = 1kHz VO = 27Vpp, RL = 2k, THD 1% Open Loop Open Loop f = 20 20kHz - - - - - - - 0.002 4.5 0.7 120 9 60 -120 - - - - - - - % nV/Hz pA/Hz kHz MHz deg dB Pin Connection Diagram Output 1 Inverting Input 1 Non-Inverting Input 1 VEE (-) 1 2 3 4 8 7 6 5 VCC (+) Output 2 Inverting Input 2 Non-Inverting Input 2 NTE891M 8 5 .260 (6.6) 1 4 .390 (9.9) Max .155 (3.93) .300 (7.62) .100 (2.54) .300 (7.62) .145 (3.68) NTE891SM .192 (4.9) 8 5 .154 (3.91) .236 (5.99) 1 4 .050 (1.27) 016 (.406) 061 (1.53) .198 (5.03) .006 (.152) NOTE: Pin1 on Beveled Edge |
Price & Availability of NTE891SM |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |